Skip to content
405nm.com

405nm.com

  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics
405nm.com
405nm.com

USHIO HL63283HD Datasheet

1.5W (Pulse)
image/svg+xmlFeaturesApplicationSingle emitterOptical output power: 1.2W (CW)1.5W (Pulse)Shorter wavelength: 637nm Typ.High wall plug efficiency: 40% Typ. High heat dissipation 9mm CAN packageMultitransverse modeTMmode oscillationLaser ProjectorShow LaserLight source of optical equipmentsData SheetHL63283HD637nm/1.2W(CW) /1.5W (Pulse)AlGaInPLaser DiodeOutline Internal Circuit・HL63283HDLD12(Unit: mm)2.54±0.351.0±0.12–0.6±0.16.5±1.01.5±0.1(2.1)Emitting point3.0±0.2(0.25)Glass7.27±0.26.64±0.1(3.7)(0.65)(90o)9.0+0–0.0250.4+0.1–01.0±0.11212HL63283HD
image/svg+xmlHL63283HDData SheetAbsolute Maximum Ratings (Tc=25°C)ItemSymbolRatingsUnitOptical output powerNote3)Po 1.2W Pulse optical output powerNote2)Note3)Po(Pulse)1.5WLD reverse voltage VR(LD) 2V Operating temperatureNote3)Topr –10~ +45°CStorage temperature Tstg –40 ~ +85 °C Note1)Operating temperature is defined by Case temperature “Tc”. High increase in temperature of LD chip itself is expected during operation ‘due to high current density. Thus, without proper heat dissipation, it is observed that no specific output power is achieved or it results to LD degradation.It is advised that sufficient measure of heat dissipation should be taken so that LD’s maximum operating temperature is not exceeded during actual operation.Note2) Pulse condition: Pulse frequency50Hz, duty=33%Note3) The relation of optical output power vs operating temperatureis based on Fig.1. Fig.1Therelation of optical output power vsoperating temperatureOptical and Electrical Characteristics (Tc=25°C)ParameterSymbolMinTypMaxUnitTest ConditionThreshold current Ith –340440mA –Operating current Iop –13001600mA Po=1.2WOperating voltage Vop –2.32.7V Po=1.2WBeam divergenceNote4)Parallel to the junction // 31020oPo=1.2W,FWHMBeam divergenceNote4)Perpendicular to the junction 233343oPo=1.2W,FWHMLasing Wavelength p 632637641nm Po=1.2WNote4) Designed value0.0 0.5 1.0 1.5 2.0 –20–1001020304050Optical output power,Po(W)Operating temperature,Topr(oC)CWPulsef=50Hz, duty=33%(–10,1.5)(25,1.5)(45,1.2)(45,0.8)(–10,1.2)(25,1.2)
image/svg+xmlHL63283HDData SheetTypical Characteristic CurvesPulse optical output power vs. Forward currentOptical out put power Po(W) Forward current IF(A)01.01.52.02.51.51.00.50Pulsef=50Hzduty=33%Tc=0oCTc=10oCTc=25oCTc=35oCTc=45oC0.5Optical output power vs. Forward currentOptical out put power Po(W) Forward current IF(A)00.51.01.52.01.21.00.80.60.40.20CWTc=0oCTc=10oCTc=25oCTc=35oCTc=45oCSlope efficiency vs. Case temperatureSlope efficiency hs(mW/mA)Case temperature Tc(oC)01020305000.20.60.81.01.21.41.6Threshold current vs. Case temperatureThreshold current Ith(mA)Case temperature Tc(oC)0101001000Lasing wavelength vs. Case temperatureLasing wavelength p(nm)Case temperature Tc(oC)0620625630635640645650655Far field patternRelative intensityAngle ( o)–40–30–20–100504030201.00.80.60.40.20CW,Tc=25oCPo=1.2WPerpendicularparallel0.44010203050401020305040CW,Po=1.2W10–50CWCW
image/svg+xmlHL63283HDData SheetCautions1.Ushio Inc.(Ushio) neither warrants nor grants licenses of any our lights or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document, Ushio bears no responsibility for problems that may arise with third party’s right, including intellectual property rights, in connection with use of the information contained in this document.2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3.Ushiomakes every attempt to ensure that its products are of high quality and reliability. However, contact our sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic safety equipment or medicalequipment for life support. 4. Design your application so that the products is used within the ranges guaranteed by Ushio. Particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Ushiobears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail–safes, so that the equipment incorporating Ushioproduct does not cause bodily injury, fire or other consequential damage due to operation of the Ushioproduct. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval fromUshio. 7. Contact our sales office for any questions regarding this document orUshioproducts.1.The laser light is harmful to human body especially to eye no matter what directly or indirectly. The laser beam shall be observed or adjusted through infrared camera or equivalent.2.This product contains gallium arsenide (GaAs)and berylliumoxide (BeO), which may seriously endanger your healtheven at very low doses. Please avoid treatment which may create powder or gas, such as disassembly or performing chemical experiments, when you handle the product. When disposing of the product, please follow the laws of your country and separate it from other waste such as industrial waste and household garbage.Important NoticePerformance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Ushiobefore they become applicable to any particular order or contract. In accordance with the Ushiopolicy of continuous improvement specifications may change without notice. Further details are available from any Ushiosales representative.Caution –use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
image/svg+xmlHL63283HDData Sheetwww.ushio.co.jp2205⑤DisclaimerProduct specifications and data shown in this product catalog are subject to change without notice for the purposes of improving product performance, reliability, design, or otherwise.Product data and parameters in this catalog are typical values based on reasonably up–to–date measurements.Product data and parameters may vary by user application and over time.Products shown in this catalog are intended to be used for general electronic equipment. Products are not guaranteed for applications where product malfunction or failure may cause personal injury or death, including but not limited to life–supporting / saving devices, medical devices, safety devices, airplanes, aerospace equipment, automobiles, traffic control systems, and nuclear reactor control systems.
  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics

© 2025 405nm.com

Contact Us

Sitemap

Scroll to top
  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics
Search