ROHM RLD65NZX2 Datasheet

RLD65NZX200A012: Laser Diode
image/svg+xml1/8650nmRed Single ModeLaser DiodeRLD65NZX2Datasheethttps://www.rohm.com/© 2019ROHM Co., Ltd. All rightsreserved.2019.5–Rev.012ApplicationSensor Bar-code scanner Leveling Ranging Etc. MeritSingle mode Φ5.6 metal stemAbsolute Maximum Ratings (Tc=25°C)ParameterSymbolRatingsUnitOptical outputPo7mWReverse voltageLDVr2VPIN PDVr(PD)20VOperating temp.Top–10 to 70°CStorage temp.Tstg–40 to 85°CCharacteristics (Tc=25°C)ParameterSymbolConditionsMIN.TYP.MAX.UnitThreshold currentIth－－2535mAOperating currentIopPo=5mW－3345mAOperating voltageVopPo=5mW－2.32.7VOutput efficiencyη2mW/(I(5mW)–I(3mW))0.40.61.0W/AMonitor currentImPo=5mW, Vr(PD)=15V0.080.200.50mABeam divergenceθ//Po=5mW6.08.512.0deg.θ⊥242834deg.Beam tolerance⊿θ//Po=5mW–30+3deg.⊿θ⊥–40+4deg.Emission point accuracy⊿XYZ－–1000+100μmLasing wavelengthλPo=5mW650658666nmAstigmatic differenceAsNA=0.55, Po=3.5mW－510μmCaution: θ⊥and θ// are defined as full width at half maximum. Operation temperature is regulated by case temperature; TcOutline view
image/svg+xmlRLD65NZX22/8Datasheethttps://www.rohm.com/© 2019ROHM Co., Ltd. All rightsreserved.2019.5–Rev.012Electrical Characteristics Optical Characteristics * This data is made from the result of having measured the sample extracted at random. Therefore, it is not what showed the ability of the whole product. 01234567012345670204060Vf [V]Po [mW]If [mA]I–VI–L25℃40℃50℃60℃70℃0123456700.10.20.30.4Po [mW]Im [mA]00.10.20.30.40.50.60.70.80.91-60-40-200204060Intensity FFP[deg.]00.10.20.30.40.50.60.70.80.91650655660665670Intensity λ[nm]25℃40℃50℃60℃70℃
image/svg+xmlRLD65NZX23/8Datasheethttps://www.rohm.com/© 2019ROHM Co., Ltd. All rightsreserved.2019.5–Rev.012DimensionsEquivalent Circuit Diagram
image/svg+xmlRLD65NZX24/8Datasheethttps://www.rohm.com/© 2019ROHM Co., Ltd. All rightsreserved.2019.5–Rev.012Specifications (Precautions and Prohibitions) ● Precautions on using ROHM Products 1) Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV equipment, OA equipment, telecommunication equipment, home electronics appliances, amusement equipment, etc.). If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment, transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Special Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. 2) ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures. [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3) Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4) The Products are not subject to radiation-proof design. 5) Please verify and confirm characteristics of the final or mounted products in using the Products. 6) In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse) is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7) De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual ambient temperature. 8) Confirm that operation temperature is within the specified range described in the product specification. 9) ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document.
image/svg+xmlRLD65NZX25/8Datasheethttps://www.rohm.com/© 2019ROHM Co., Ltd. All rightsreserved.2019.5–Rev.012● Precaution for Mounting / Circuit board designWhen a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. Regarding Precaution for Mounting / Circuit board design, please specially refer to ROHM Mounting specification. (Refer to precaution of the individual product.) ● Precautions Regarding Application Examples and External Circuits 1) If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2) You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use. Therefore, in case you use such information, you are solely responsible for it and you must exercise you own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for damages, expenses or losses incurred by you or third parties arising from the use of such information. ● Precaution for ElectrostaticThis Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). ● Precautions for Storage / Transportation1) Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM (Ambient temperature: 5 to 40°C, relative humidity: 30 to 80%) [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic2) Even under ROHM recommended storage condition, solder-ability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm the characteristics and solder-ability before using Products of which storage time is exceeding the recommended storage time period (The recommended storage time period is one year after the shipment.) 3) Store / transport cartons in the correct direction, which is indicated on a carton as a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. ● Precaution for product label QR code printed on ROHM product label is for ROHM’s internal use only, and please do not use at customer site. ● Precaution for disposition When disposing Products please dispose them properly using an authorized industry waste company. ●Precaution for Foreign exchange and Foreign Trade act Note: Since concerned goods have not been determined to be fallen under listed items of export control prescribed by Foreign Exchange and Foreign Trade act or not, please consult with ROHM in case of export.
image/svg+xmlRLD65NZX26/8Datasheethttps://www.rohm.com/© 2019ROHM Co., Ltd. All rightsreserved.2019.5–Rev.012● Precautions Regarding Intellectual Property Rights 1) All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2) ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the Products with other articles such as components, circuits, systems or external equipment (including software) 3) No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. ● Other Matters 1) This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2) The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3) In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4) The proper names of companies or products described in this document are trademarks of registered trademarks of ROHM, its affiliated companies or third parties. 5) The information contained herein is subject to change without notice.