Skip to content
405nm.com

405nm.com

  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics
405nm.com
405nm.com

Osram PL450B Datasheet

PL_450B_2016-09-19.fm
image/svg+xml19.09.20161DRAFT – This design is for Reference only. Subject to change – may be necessary in a limited number of cases.ATTENTION – Observe Precautions For Handling – Electrostatic Sensitive Device 2007-05-23 Blue Laser Diode in TO38 ICut PackageVersion 0.3PL 450B Features •Optical output power (continuous wave): 80 mW (Tcase = 25 °C)•Typical emission wavelength: 450 nm•Efficient radiation source for cw and pulsed operation•Single transverse mode semiconductor laser•High modulation bandwidth•Miniaturized TO38 ICut package•Laser diode isolated against packageApplications•Laser projection•Laser shows•Biomedical Applications•MetrologySafety AdviceDepending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions found in IEC 60825-1 “Safety of laser products”.
image/svg+xml19.09.20162DRAFT – This design is for Reference only. Subject to change – may be necessary in a limited number of cases.Version 0.3PL 450BOrdering InformationMaximum Ratings Operation outside these conditions may damage the device. Operation at maximum ratings may influencelifetime.Laser Characteristics(Tcase= 25 °C) Type:Optical Output PowerOrdering CodePopt(Tcase = 25 °C)PL 450B 80 mWQ65111A0518ParameterSymbolValuesUnitmin.max.Optical Output PowerPopt max120mWOperating CurrentIF165mAOperating TemperatureTcase -40+70°CStorage TemperatureTstg-40+85°CReverse VoltageVR2VSoldering Temperature max. 10 sec.Tsolder260°CJunction temperatureTj120°CParameterSymbolValuesUnitmin.typ.max.Emission Wavelength 1)1)Standard operating conditions refer to a continuous wave output power of Popt= 80 mW.λpeak440450460nmSpectral Width (FWHM) 1)Δλ–2–nmThreshold CurrentIth–1740mAOperating Current 1)IF–75145mAOperating Voltage 1)VF–5.26.5VBeam Divergence (FWHM) 1)θ∥xθ⊥4 x186.5 x22.57.5 x25degPolarization 1)Pgr–100:1–TE:TMModulation Frequencyf–>100–MHzThermal resistance (junction to case)Rth–38–K/W
image/svg+xmlVersion 0.3PL 450B19.09.20163DRAFT – This design is for Reference only. Subject to change – may be necessary in a limited number of cases.Optical Output PowerPopt= ƒ (IF)Operating VoltageVF= ƒ (IF)Threshold CurrentIth= ƒ (Tcase)Relative Spectral EmissionPopt= ƒ (λ)020406080100020406080Tcase=60°CTcase=40°CTcase=25°CPopt[mW]IF[mA]0204060801000123456Tcase=60°CTcase=40°CTcase=25°CVF[V]IF[mA]30405060701015202530Ith[mA]Tcase[°C]4464484504524540.00.20.40.60.81.0Tcase=25°CTcase=60°CTcase=40°CPopt[a.u.][nm]
image/svg+xml19.09.20164DRAFT – This design is for Reference only. Subject to change – may be necessary in a limited number of cases.Version 0.3PL 450BBeam DivergencePopt=ƒ(θ),Tcase= 25 °C-40-20020400.00.20.40.60.81.0⊥||Popt[a.u.][deg]
image/svg+xmlVersion 0.3PL 450B19.09.20165DRAFT – This design is for Reference only. Subject to change – may be necessary in a limited number of cases.Package OutlineDimensions in mmPin Connection1 2 3 Pin 1: LD Anode Pin 2: Case Pin 3: LD Cathode
image/svg+xml19.09.20166DRAFT – This design is for Reference only. Subject to change – may be necessary in a limited number of cases.Version 0.3PL 450BTrayDimensions in mm [inches]
image/svg+xmlVersion 0.3PL 450B19.09.20167DRAFT – This design is for Reference only. Subject to change – may be necessary in a limited number of cases.Dimensions of transportation box in mm Barcode-Product-Label (BPL)Transportation Packing and MaterialsWidthLengthHeight170 ± 5265 ± 545 ± 5OHA04563(G) GROUP:1234567890(1T) LOT NO:(9D) D/C:1234(X) PROD NO:123456789(6P) BATCH NO:1234567890LX XXXXRoHS CompliantBIN1: XX-XX-X-XXX-XMLXTemp STXXX °C XPack: RXXDEMY XXXX_X123_1234.1234 X9999(Q)QTY:SemiconductorsOSRAM OptoXX-XX-X-XLEXXPLELLXX1234.1234 XX-X-XLLLLLLPLXXXXXX_123_123-XX--XX-MPLRXXXXX_X123_1XX-XXMPLPack: RXPack: RXDEMY DEMY MP34MPAMPMMMAMMAMM9D) D/C:9D) D/C:12341234MMMMM234PLPack: RDEMY AMMMAMAM) D/CMPMMMC:123AMAMAAM(9D)XAAAXAAXAXXAXEXAEXEXEXXXXAXXEXEXX6789067890EXXXXXXEXEXAEEEXEXEEXXEEXEEXEXEXO:1234567orsEEEEEEEEENO:NO:1234512345EXctorsctorsptoptoXAX78904 XRXXDEMY X1239D) D/C:1234(967890NO:12345ptoXXX3_123-XX-Pack: RDEMY ctorsOHA02886PACKVAR:R077Additional TEXTP-1+Q-1Multi TOPLEDMusterOSRAM OptoSemiconductors(6P) BATCH NO:(X) PROD NO:10(9D) D/C:11(1T) LOT NO:210021998123GH12340245(Q)QTY:20000144(G) GROUP:260 C RT240 C R3220 C RMLBin3:Bin2: Q-1-20Bin1: P-1-20LSY T67622aTemp STR18DEMYBarcode labelOriginal packing labelBox
image/svg+xml19.09.20168DRAFT – This design is for Reference only. Subject to change – may be necessary in a limited number of cases.Version 0.3PL 450BDisclaimerOSRAM OS assumes no liability whatsoever for any use of this document or its content by recipient including, but not limited to, for any design in activities based on this preliminary draft version. OSRAM OS may e. g. decide at its sole discretion to stop developing and/or finalizing the underlying design at any time.Attention please!The information describes the type of component and shall not be considered as assured characteristics.Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.If printed or downloaded, please find the latest version in the Internet.PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.Components used in life-support devices or systems must be expressly authorized for such purpose!Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS.*) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system.**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.Important notes of operation for laser diodea) Electrical operationOSRAMs laser diodes are designed for maximum performance and reliability. Operating the laser diode above the maximum rating even for very short periods of time can damage the laser diode or reduce its lifetime. The laser diode must be operated with a suitable power supply with minimized electrical noise.The laser diode is very sensitive to electrostatic discharge (ESD). Proper precautions must be taken.b) Mounting instructionsIn order to maintain the lifetime of the laser diode proper heat management is essential. Due to the design of the laser diode heat is dissipated only through the base plate of the diode‘s body. A proper heat conducting interconnection between the diodes base plate and the heat sink must be maintained.
image/svg+xmlVersion 0.3PL 450B19.09.20169DRAFT – This design is for Reference only. Subject to change – may be necessary in a limited number of cases.Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.Eu RoHS compliant product
  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics

© 2025 405nm.com

Contact Us

Sitemap

Scroll to top
  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics
Search