Skip to content
405nm.com

405nm.com

  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics
405nm.com
405nm.com

Coherent Sapphire 488 Datasheet

image/svg+xmlSapphire LPCW Visible Lasers from Deep Blue to OrangeSapphire LP is a series of compact CW visible lasers based on Coherent’s unique OPSL (Optically Pumped Semiconductor Laser) technology. OPSL technology not only provides established legacy wavelengths of ion and diode-pumped solid-state lasers, but their scalability also allows for customized wavelengths to be developed and tailored to a specifc application. Sapphire LP lasers are manufactured in cleanrooms using Coherent’s patented PermAlign™ technology for optimal aligning and solder- bonding the optics. This patented technology results in the best beam quality and power stability as well as the lowest noise over the complete lifetime of the laser. Sapphire LP lasers come with a fexible interface concept: Analog, RS-232 or USB – it is up the user to select the appropriate communi- cation channel. Sapphire LP lasers feature superior performance, proven reliability and low cost of ownership making them the ideal laser solution for a variety of applications e.g. in life sciences, environmental protection, semicon- ductor inspection and metrology.FEATURES & BENEFITS•Wavelength versatility– 458 nm to 594 nm•Broad spectrum of output power– 10 mW up to 300 mW•Outstanding power stability andlow noise•Superior beam quality•Flexible interface concept– Analog, RS-232 & USB•PermAlign technology– Permanent optimal alignment– Unsurpassed robust and stable•Proven reliability– More than 35,000 installations•OEM and end-user versionsAPPLICATIONS•Flow Cytometry•Confocal Microscopy•Genomics & Proteomics•High Throughput Drug Screening•Medical Diagnostics•Micro Array Scanning•Semiconductor Inspection•Metrology
image/svg+xmlSapphire LP DatasheetSPECIFICATIONSSapphire 458 LPSapphire 488 LPWavelength1(nm) 458 ±2 488 ±2Output Power2(mW)20, 50, 7510, 20, 25, 30, 40, 50, 75, 100, 150, 200, 300Spatial ModeTEM00, M2<1.1Beam Asymmetry 0.9 to 1.1Beam Diameter at 1/e20.70 ±0.05 mmBeam Divergence (mrad) <1.2Pointing Stability (μrad)(over 2 hours after warm-up and ±3°C)<30Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak<0.25<1Long-term Power Stability (%) (2 hours, ±3°C) <2Warm-up Time (minutes) <5Polarization Ratio >100:1, verticalStatic Alignment Tolerances3Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25±2.5±2004UTILITY AND ENVIRONMENTAL REQUIREMENTSOperating Voltage5(VDC)Maximum Rated Nominal +10.8 to 15.0+12.0 to 13.2Power Consumption (W) <60Max. Laser Head Baseplate Temperature6+50°C (122°F)+55°C (131°F), +50°C (122°F)7Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C)25 (baseplate at 55°C/50°C)7Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing-30 to 60°C (-22 to 140°F)Shock Tolerance (6 ms) 7 g laterally, 15 g verticallyDimensions (L x W x H)Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.)117.8 x 76.2 x 30 mm (4.6 x 3.0 x 1.2 in.)200 x 80 x 50 mm (7.9 x 3.2 x 2 in.)171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.)2 m (6.56 ft.), optional 5 m (16.4 ft.)Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.)0.25 kg (0.55 lbs.)0.75 kg (1.65 lbs.)0.95 kg (incl. line cable) (2.1 lbs.)1.7 kg (3.7 lbs.)0.3 kg (0.66 lbs.)1Laser-to-laser tolerance. With residual IR emission less than 0.1 mW.2Output power is adjustable via analog or digital interface from10% to 110%. Specifcations are valid for 100% power. Recommended power range is 70 to 110% power. 3Static alignment tolerances are relative to the right bottom edge (in beam direction).4200 mm is ~30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm.5If user-supplied, the DC power supply has to meet the followingrequirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.6With factory-provided or other adequate heat sink.7Sapphire 488-10/20/25/30 has a maximum baseplate temperature of+55°C (+131°F). Sapphire 488-40/50/75/100/150/200 and 300 mW models are limited to a maximum baseplate temperature of +50°C (+122°F).
image/svg+xmlSapphire LP DatasheetSPECIFICATIONSSapphire 514 LPSapphire 532 LPSapphire 552 LPWavelength1(nm) 514 ±2 532 ±2552 ±2Output Power2(mW)20, 50, 75, 100, 15020, 50, 75, 100, 150, 200, 30050, 75, 100, 150, 200Spatial ModeTEM00, M2<1.1Beam Asymmetry 0.9 to 1.1Beam Diameter at 1/e20.70 ±0.05 mmBeam Divergence (mrad) <1.3Pointing Stability (μrad)(over 2 hours after warm-up and ±3°C)<30Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak<0.25<1Long-term Power Stability (%) (2 hours, ±3°C) <2Warm-up Time (minutes) <5Polarization Ratio >100:1, verticalStatic Alignment Tolerances3Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25±2.5±2004UTILITY AND ENVIRONMENTAL REQUIREMENTSOperating Voltage5(VDC)Maximum Rated Nominal +10.8 to 15.0+12.0 to 13.2Power Consumption (W) <60Max. Laser Head Baseplate Temperature6+50°C (122°F)Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C)Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing-30 to 60°C (-22 to 140°F)Shock Tolerance (6 ms) 7 g laterally, 15 g verticallyDimensions (L x W x H)Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.)117.8 x 76.2 x 30 mm (4.6 x 3.0 x 1.2 in.)200 x 80 x 50 mm (7.9 x 3.2 x 2 in.)171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.)2 m (6.56 ft.), optional 5 m (16.4 ft.)Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.)0.25 kg (0.55 lbs.)0.75 kg (1.65 lbs.)0.95 kg (incl. line cable) (2.1 lbs.)1.7 kg (3.7 lbs.)0.3 kg (0.66 lbs.)1Laser-to-laser tolerance. With residual IR emission less than 0.1 mW.2Output power is adjustable via analog or digital interface from10% to 110%. Specifcations are valid for 100% power. Recommended power range is 70 to 110% power. 3Static alignment tolerances are relative to the right bottom edge (in beam direction).4200 mm is ~30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm.5If user-supplied, the DC power supply has to meet the followingrequirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.6With factory-provided or other adequate heat sink.
image/svg+xmlSapphire LP DatasheetSPECIFICATIONSSapphire 561 LPSapphire 568 LPSapphire 588 LPSapphire 594 LPWavelength1(nm) 561 ±2 568 ±2588 ±2594 ±2Output Power2(mW)20, 50, 75, 100, 150, 200, 30050, 75, 100, 150, 20020, 50, 75, 10020, 50, 75Spatial ModeTEM00, M2<1.1Beam Asymmetry 0.9 to 1.1Beam Diameter at 1/e20.70 ±0.05 mmBeam Divergence (mrad) <1.3Pointing Stability (μrad)(over 2 hours after warm-up and ±3°C)<30Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak<0.25<1Long-term Power Stability (%) (2 hours, ±3°C) <2Warm-up Time (minutes) <5Polarization Ratio >100:1, verticalStatic Alignment Tolerances3Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25±2.5±2004UTILITY AND ENVIRONMENTAL REQUIREMENTSOperating Voltage5(VDC)Maximum Rated Nominal +10.8 to 15.0+12.0 to 13.2Power Consumption (W) <60Max. Laser Head Baseplate Temperature6+50°C (122°F)Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C)Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing-30 to 60°C (-22 to 140°F)Shock Tolerance (6 ms) 7 g laterally, 15 g verticallyDimensions (L x W x H)Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.)117.8 x 76.2 x 30 mm (4.6 x 3.0 x 1.2 in.)200 x 80 x 50 mm (7.9 x 3.2 x 2 in.)171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.)2 m (6.56 ft.), optional 5 m (16.4 ft.)Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.)0.25 kg (0.55 lbs.)0.75 kg (1.65 lbs.)0.95 kg (incl. line cable) (2.1 lbs.)1.7 kg (3.7 lbs.)0.3 kg (0.66 lbs.)1Laser-to-laser tolerance. With residual IR emission less than 0.1 mW.2Output power is adjustable via analog or digital interface from10% to 110%. Specifcations are valid for 100% power. Recommended power range is 70 to 110% power. 3Static alignment tolerances are relative to the right bottom edge (in beam direction).4200 mm is ~30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm.5If user-supplied, the DC power supply has to meet the followingrequirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.6With factory-provided or other adequate heat sink.
image/svg+xmlMEASUREMENT TOOLSPart NumberMeter FieldMax™II-TO 1098579SensorPS10Q1098400MECHANICAL SPECIFICATIONSSapphire LP Datasheet6.1 mm(0.24 in.)20.4 mm(0.8 in.)11 mm(0.43 in.)16.7 mm(0.66 in.)0 mm (0.0 in.)5.1 mm (0.2 in.)21.1 mm (0.8 in.)35.3 mm (1.4 in.)62.6 mm (2.5 in.)102.9 mm (4.0 in.)112.4 mm (4.4 in.)117.8 mm (4.6 in.)8.3 mm(0.327 in.)66 mm(2.6 in.)76.2 mm(3.0 in.)8.8 mm (0.345 in.)6.35 mm(0.25 in.)app.35 mm(1.38 in.)max.6.1 mm(0.24 in.)6 spacers with tapped threadM4, UNC #8 or 5/32 BSWare attachedUSB-InterfaceMini USB-Type B5 polSerial InterfaceDSub-9 (female)Analog Interface26 pin-headertype AMP latchTyco 281275-1Laser Head DSub-25 (female)Fuse TE5 5A 127V Littlefuse 3961500000DC Power ConnectorMolex Micro Fit 3.0 10 positionsControllerTop ViewSide View
image/svg+xmlCoherent follows a policy of continuous product improvement. Specifcations are subject to change without notice. Coherent’s scientifc and industrial lasers are certifed to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.Coherent ofers a limited warranty for all Sapphire Lasers. For full details of this warranty coverage, please refer to the Service section at www.coherent.com or contact your local Sales or Service Representative.MC-027-10-0M1119Rev.L Copyright ©2019 Coherent, Inc.Coherent, Inc., 5100 Patrick Henry Drive Santa Clara, CA 95054 p. (800) 527-3786 | (408) 764-4983 f. (408) 764-4646[email protected] www.coherent.comVISIBLE AND INVISIBLE LASER RADIATION.AVOID EYE OR SKIN EXPOSURE TODIRECT OR SCATTERED RADIATION.CLASS IIIb LASER PRODUCT.λ0.58 to 0.60 µm0.79 to 0.82 µm1.10 to 1.20 µmMax. Power480 mW20 mW50 mWVISIBLE AND INVISIBLE LASER RADIATION.AVOID EYE OR SKIN EXPOSURE TODIRECT OR SCATTERED RADIATION.CLASS IIIb LASER PRODUCT.λ0.55 to 0.58 µm0.79 to 0.82 µm1.10 to 1.20 µmMax. Power480 mW20 mW50 mWVISIBLE AND INVISIBLE LASER RADIATION.AVOID EYE OR SKIN EXPOSURE TODIRECT OR SCATTERED RADIATION.CLASS IIIb LASER PRODUCT.λ0.54 to 0.57 µm0.79 to 0.82 µm1.10 to 1.20 µmMax. Power480 mW20 mW50 mWVISIBLE AND INVISIBLE LASER RADIATION.AVOID EYE OR SKIN EXPOSURE TODIRECT OR SCATTERED RADIATION.CLASS IIIb LASER PRODUCT.λ0.50 to 0.55 µm0.79 to 0.82 µm1.00 to 1.10 µmMax. Power480 mW20 mW50 mWVISIBLE AND INVISIBLE LASER RADIATION.AVOID EYE OR SKIN EXPOSURE TODIRECT OR SCATTERED RADIATION.CLASS IIIb LASER PRODUCT.λ0.45 to 0.50 µm0.79 to 0.82 µm0.90 to 1.00 µmMax. Power480 mW20 mW50 mWVISIBLE AND INVISIBLE LASER RADIATION.AVOID EYE OR SKIN EXPOSURE TODIRECT OR SCATTERED RADIATION.CLASS IIIb LASER PRODUCT.λ0.45 to 0.50 µm0.79 to 0.82 µm0.90 to 1.00 µmMax. Power350 mW20 mW50 mWVISIBLE AND INVISIBLE LASER RADIATION.AVOID EYE OR SKIN EXPOSURE TODIRECT OR SCATTERED RADIATION.CLASS IIIb LASER PRODUCT.λ0.45 to 0.50 µm0.79 to 0.82 µm0.90 to 1.00 µmMax. Power150 mW20 mW50 mWMECHANICAL SPECIFICATIONSSapphire LP Datasheet15 mm(0.6 in.)17.9 mm(0.7 in.)17.5 mm(0.69 in.)5 mm (0.2 in.)10 mm (0.4 in.)110 mm(4.3 in.)115.6 mm (4.5 in.)120 mm (4.7 in.)125 mm (4.9 in.)7.5 mm(0.3 in.)19 mm(0.75 in.)34 mm(1.3 in.)BeamExit6 mm(0.24 in.)70 mm(2.75 in.)55 mm(2.2 in.)45 mm(1.8 in.)Position of Dowel Pins(Beam Registering)LED(Emission Indicator)Connection to Controller(25pin SUB-D male)DC Supply for Fan(AMP-MODU-2pin-male)Interfacing Part (Heatsink) should haveflatness <0.05 mm (0.002 in.)Beam Waist at Exit Window[3 mm (0.12 in.) inside from here][±200 mm (7.9 in.)]4 Holes Ø4.0 mm (0.16 in.)for Screws M3, UNC/UNF No.5&6,1/8-40 BSW/BSF or BA No.4&5Sapphire LPRear ViewFront ViewTop View
  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics

© 2025 405nm.com

Contact Us

Sitemap

Scroll to top
  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics
Search