Skip to content
405nm.com

405nm.com

  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics
405nm.com
405nm.com

Osram PLT5 450B Datasheet

image/svg+xmlPLT5 450BDATASHEETDATASHEET1| Version 0.6 | 2023-03-01Preliminary datasheet version Discontinuedwww.osram-os.comPLT5 450BDatasheetPreliminary datasheet version DiscontinuedPublished by ams-OSRAM AGTobelbader Strasse 30, 8141 Premstaetten, AustriaPhone +43 3136 500-0ams-osram.com© All rights reserved
image/svg+xmlPLT5 450BDATASHEETDATASHEET2| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedMetal Can TO56 PLT5 450BBlue Laser Diode in TO56 PackageApplications-Digital Diagnostic Devices -Entertainment -Factory Automation -Medical ImagingFeatures-Optical output power (continuous wave): 100 mW (TC = 25°C) -Typical emission wavelength: 450 nm –Efcient radiation source for cw and pulsed operation-Single mode semiconductor laser -High modulation bandwidth -TO56 package
image/svg+xmlPLT5 450BDATASHEETDATASHEET3| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedOrdering InformationTypePeak output power Ordering Codetyp.PoptPLT5 450B100 mWQ65111A7459
image/svg+xmlPLT5 450BDATASHEETDATASHEET4| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedMaximum RatingsTC= 25 °CParameterSymbolValuesOperating temperatureTopmin. max.-40 °C 70 °CStorage temperatureTstgmin. max.-40 °C 85 °CJunction temperatureTjmax.150 °CPeak output power 1)Poptmax.120 mWForward current 2)IFmax.165 mAReverse voltage 3)VRmax.2 VSoldering temperature tmax= 10 secTSmax.260 °COperation outside these conditions may damage the device. Operation at maximum ratings may infuence lifetime.
image/svg+xmlPLT5 450BDATASHEETDATASHEET5| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedCharacteristicsPopt= 100 mW; Tcase= 25 °CParameterSymbol ValuesOperating current 2)Ioptyp. max.90 mA 165 mAPeak wavelength 4)λpeakmin. typ. max.440 nm 450 nm 460 nmSpectral bandwidth (FWHM)∆λtyp.1 nmBeam divergence (FWHM) parallel to pn-junctionΘ‖min. typ. max.4 ° 6.5 ° 7.5 °Beam divergence (FWHM) perpendicular to pn-junctionΘ┴min. typ. max.18 ° 22 ° 25 °Threshold currentIthtyp. max.17 mA 60 mAForward voltage 5)6)VFtyp. max.5.5 V 7.0 VTE polarizationPTEtyp.100:1Modulation frequencyfmin.100 MHzThermal resistance junction case realRthJCtyp.34 K / WInfo: according to OS-IN-2021-003
image/svg+xmlPLT5 450BDATASHEETDATASHEET6| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedRelative Spectral Emission7)Popt= f (λ)Beam Divergence7)Popt=f(Θ); Tcase= 25 °C
image/svg+xmlPLT5 450BDATASHEETDATASHEET7| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedOptical Output Power7)Popt= f (IF)Forward Voltage7)VF= f (IF)Threshold Current7)Ith= f(TC)
image/svg+xmlPLT5 450BDATASHEETDATASHEET8| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedDimensional Drawing8)Further Information:Approximate Weight:310.0 mgESD advice:ATTENTION – Observe Precautions For Handling – Electrostatic Sensitive Device
image/svg+xmlPLT5 450BDATASHEETDATASHEET9| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedElectrical Internal CircuitPinDescriptionPIN 1LD AnodePIN 2CasePIN 3LD Cathode
image/svg+xmlPLT5 450BDATASHEETDATASHEET10| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedTray8)200 pieces per trayBarcode-Product-Label (BPL)
image/svg+xmlPLT5 450BDATASHEETDATASHEET11| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedSchematic Transportation Box8)OHA02886PACKVAR:R077Additional TEXTP–1+Q-1Multi TOPLEDMusterOSRAM OptoSemiconductors(6P) BATCH NO:(X) PROD NO:10(9D) D/C:11(1T) LOT NO:210021998123GH12340245(Q)QTY:20000144(G) GROUP:260 C RT240 C R3220 C RMLBin3:Bin2: Q-1-20Bin1: P-1-20LSY T67622aTemp STR18DEMYBarcode labelOriginal packing labelBoxDimensions of Transportation BoxWidthLengthHeight215 ± 5 mm265 ± 5 mm95 ± 5 mm NotesDepending on the mode of operation, these devices emit highly concentrated visible and non visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1.Subcomponents of this device contain, in addition to other substances, metal flled materials including silver. Metal flled materials can be afected by environments that contain traces of aggressive substances. There–fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810.
image/svg+xmlPLT5 450BDATASHEETDATASHEET12| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedNotesImportant notes of operation for laser diodea) Electrical operationOSRAMs laser diodes are designed for maximum performance and reliability. Operating the laser diode above the maximum rating even for very short periods of time can damage the laser diode or reduce its lifetime. The laser diode must be operated with a suitable power supply with minimized electrical noise.The laser diode is very sensitive to electrostatic discharge (ESD). Proper precautions must be taken. b) Mounting instructionsIn order to maintain the lifetime of the laser diode proper heat management is essential. Due to the design of the laser diode heat is dissipated only through the base plate of the diode‘s body. A proper heat conduct–ing interconnection between the diodes base plate and the heat sink must be maintained.For further application related information please visit www.osram-os.com/appnotesDepending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 and IEC 62471.
image/svg+xmlPLT5 450BDATASHEETDATASHEET13| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedDisclaimerAMS OSRAM assumes no liability whatsoever for any use of this document or its content by recipient in–cluding, but not limited to, for any design in activities based on this preliminary draft version. AMS OSRAM may e.g. decide at its sole discretion to stop developing and/or fnalizing the underlying design at any time.Attention please!The information describes the type of component and shall not be considered as assured characteristics.Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances.For information on the types in question please contact our Sales Organization.If printed or downloaded, please fnd the latest version on our website.PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearest sales ofce. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.Product and functional safety devices/applications or medical devices/applicationsOur components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices.Our products are not qualifed at module and system level for such application.In case buyer – or customer supplied by buyer – considers using our components in product safety devices/applications or medical devices/applications, buyer and/or customer has to inform our local sales partner immediately and we and buyer and /or customer will analyze and coordinate the customer-specifc request between us and buyer and/or customer.
image/svg+xmlPLT5 450BDATASHEETDATASHEET14| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedGlossary1)Brightness:The brightness values are measured with a tolerance of ±11%.2)Operating/Forward current:IF is measured with an internal reproducibility of ±7 % (acc. to GUM with a coverage factor of k = 3).3)Reverse Operation:This product is intended to be operated applying a forward current within the speci–fed range. Applying any reverse bias shall be avoided.4)Wavelength:λpeak is measured with an internal reproducibility of ±0.3 nm (acc. to GUM with a cover–age factor of k = 3).5)Operating/Forward voltage:VF is measured with an internal reproducibility of ±0.05 V (acc. to GUM with a coverage factor of k = 3).6)Forward Voltage:The forward voltages are measured with a tolerance of ±0.1 V.7)Typical Values:Due to the special conditions of the manufacturing processes of semiconductor devic–es, the typical data or calculated correlations of technical parameters can only refect statistical fgures. These do not necessarily correspond to the actual parameters of each single product, which could dif–fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.8)Tolerance of Measure:Unless otherwise noted in drawing, tolerances are specifed with ±0.1 and dimensions are specifed in mm.
image/svg+xmlPLT5 450BDATASHEETDATASHEET15| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedRevision HistoryVersionDateChange0.52020-12-22Ordering InformationMaximum Ratings Characteristics0.62023-03-01New LayoutApplications Discontinued
image/svg+xmlPLT5 450BDATASHEETDATASHEET16| Version 0.6 | 2023-03-01Preliminary datasheet version DiscontinuedPreliminary datasheet version DiscontinuedPublished by ams-OSRAM AGTobelbader Strasse 30, 8141 Premstaetten, AustriaPhone +43 3136 500-0ams-osram.com© All rights reserved
  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics

© 2024 405nm.com

Contact Us

Sitemap

Scroll to top
  • Home
  • News
  • Calculators
  • Datasheets
  • Laser Safety
  • Pointers
  • Industrial
  • Lab Lasers
  • Optics
  • Physics
Search